oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if120.3m-10a 120.3mhz if saw filter 10.55mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if120.3m-10a january 2011 rev a 120.3mhz if saw filter 10.55mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1 = 22 nh, c1 = 8 pf output l2 = 22 nh, c2 = 8 pf source/load impedance 50 ?
oscilent part number 813-if120.3m-10a january 2011 rev a 120.3mhz if saw filter 10.55mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -5 - +65 storage temperature range c -30 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 120.3 - insertion loss at fo db - 20.5 22.0 group delay variation at fo 5.00 mhz ns - 52 90 absolute delay at fo us - 1.61 - amplitude ripple at fo 5.00 mhz db - 0.50 - bandwidth at -1db mhz 10.40 10.55 - bandwidth at -3db mhz - 11.05 - bandwidth at -25db mhz - 12.55 12.70 bandwidth at -40db mhz - 12.90 13.30 relative attenuation lower sidelobe db 48 52 - upper sidelobe db 48 52 - temperature coefficient ppm/ c - -72 -
oscilent part number 813-if120.3m-10a january 2011 rev a 120.3mhz if saw filter 10.55mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?25.0 db bandwidth at ?40.0 db
oscilent part number 813-if120.3m-10a january 2011 rev a 120.3mhz if saw filter 10.55mhz bandwidth product specification p. 4 www.oscilent.com ripple variation at fo 5.00 mhz group delay variation at fo 5.00 mhz smith chart
oscilent part number 813-if120.3m-10a january 2011 rev a 120.3mhz if saw filter 10.55mhz bandwidth product specification p. 5 www.oscilent.com vswr
|